S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
1 - 12 of 17 ▶|
View:
 
Description
Price
Quantity

Skjonberg CBL-RC-TJ21K-100

100' Remote Cable for CS Series Remotes/ Controller to Remote

Item#:
CBL-RC-TJ21K-100
Available:
Special Order/Direct Ship
Call to order

Skjonberg CBL-RC-TJ21K-25

25' Remote Cable for CS Series Remotes/ Controller to Remote

Item#:
CBL-RC-TJ21K-25
Available:
Special Order/Direct Ship
Call to order

Skjonberg CBL-RC-TJ21K-50

50' Remote Cable for CS Series Remotes/ Controller to Remote

Item#:
CBL-RC-TJ21K-50
Available:
Special Order/Direct Ship
Call to order

Skjonberg CBL-RX-TJ21K-100

100' Remote Extension Cable for CS Series Remotes

Item#:
CBL-RX-TJ21K-100
Available:
Special Order/Direct Ship
Call to order

Skjonberg CBL-RX-TJ21K-25

25' Remote Extension Cable for CS Series Remotes

Item#:
CBL-RX-TJ21K-25
Available:
Special Order/Direct Ship
Call to order

Skjonberg CBL-RX-TJ21K-50

50' Remote Extension Cable for CS Series Remotes

Item#:
CBL-RX-TJ21K-50
Available:
Special Order/Direct Ship
Call to order

Skjonberg CS-400

4 Channel Hoist Controller-Local Control Only

STANDARD FEATURES:

  • Runs up to 4 hoists
  • 30amp Hubbell power input connector
  • Hubbell power and control output connectors
  • 50amp main emergency disconnect contactors
  • Safety keyswitch for on/off and phase selection
  • Input phase reversal
  • Phase power indicators
  • Choice of chassis: 19" rack mountable or radial curved sides for stand- alone use
  • Branch circuit breaker protection, 2 hoists per breaker
  • Protective bar over circuit breakers
  • Momentary run switch with 25 ft cord

OPTIONAL FEATURES:

  • Road case with casters and remote storage pocket
    (not shown)
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Half couplers for truss attachment
  • Modification to run single phase hoists up to 50 amps total current
  • Phase selector switch in place of keyswitch

SPECIFICATIONS:

  • Rack mountable chassis dimensions:
    19.0 in.W x 15.75 in. H x 6.0 in. D
  • Standalone chassis dimensions:
    16.5 in. W x 15.75 in. H x 7.0 in. D
  • Weight: 32 lbs.
  • Electrical: 208-240 vac, 30 amps, 50-60 hz, 3 phase
Item#:
CS-400
Available:
Special Order/Direct Ship
Call to order

Skjonberg CS-400R

4 Channel Hoist Controller (remote unit not included)

STANDARD FEATURES:

  • Runs up to 4 hoists
  • 30amp Hubbell power input connector
  • Hubbell power and control output connectors
  • 50amp main emergency disconnect contactors
  • Safety keyswitch for on/off and phase selection
  • Input phase reversal
  • Phase power indicators
  • Choice of chassis: 19" rack mountable or radial curved sides for standalone use
  • Branch circuit breaker protection, 2 hoists per breaker
  • Protective bar over circuit breakers
  • Multi-pin connector to accept our standard remote cable
  • UL and C/UL 508A Listed

OPTIONAL FEATURES:

  • Road case with casters and remote storage pocket
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Half couplers for truss attachment
  • Modification to run single phase hoists up to 50amps total current
  • Phase selector switch in place of keyswitch

SPECIFICATIONS:

  • Rack mountable chassis dimensions:
    19.0 in.W x 15.75 in. H x 6.0 in. D
  • Standalone chassis dimensions:
    16.5 in. W x 15.75 in. H x 7.0 in. D
  • Weight: 32 lbs.
  • Electrical: 208-240 vac, 30 amps, 50-60 hz, 3 phase
Item#:
CS-400R
Available:
Special Order/Direct Ship
Call to order

Skjonberg CS-400RLX

4 Channel Hoist Controller (remote unit not included)

STANDARD FEATURES:

  • Runs up to 4 hoists
  • 30amp Hubbell power input connector
  • Litton, Veam or Socapex hoist power and control output connectors
  • 50amp main emergency disconnect contactors
  • Safety keyswitch for on/off and phase selection
  • Input phase reversal
  • Phase power indicators
  • Choice of chassis: 19" rack mountable or radial curved sides for standalone use
  • Branch circuit breaker protection, 2 hoists per breaker
  • Protective bar over circuit breakers
  • Multi-pin connector to accept our standard remote cable

OPTIONAL FEATURES:

  • Road case with casters and remote storage pocket (shown)
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Half couplers for truss attachment
  • Modification to run single phase hoists up to 50amps total current
  • Phase selector switch in place of keyswitch

SPECIFICATIONS:

  • Rack mountable chassis dimensions:
    19.0 in.W x 15.75 in. H x 6.0 in. D
  • Standalone chassis dimensions:
    16.5 in. W x 15.75 in. H x 7.0 in. D
  • Weight: 32 lbs.
  • Electrical: 208-240 vac, 30amps, 50-60 hz, 3 phase

CS REMOTE FEATURES:

  • Detachable cable or hardwired cable models offered
  • Hardwired units have 25 ft cable with metal strain relief at each end for added strength
  • Up/down toggles with indicator leds for each hoist
  • Momentary run switch
  • Emergency stop/ power on/off toggle
Item#:
CS-400RLX
Available:
Special Order/Direct Ship
Call to order

Skjonberg CS-400RS

4 Channel Hoist Control-Single Phase Motors (remote unit not included)
 STANDARD FEATURES:
  • Runs up to 4 hoists
  • 30amp Hubbell power input connector
  • Hubbell power and control output connectors
  • 50amp main emergency disconnect contactors
  • Safety keyswitch for on/off and phase selection
  • Phase power indicators
  • Choice of chassis: 19" rack mountable or radial curved sides for standalone use
  • Branch circuit breaker protection, 2 hoists per breaker
  • Protective bar over circuit breakers
  • Multi-pin connector to accept our standard remote cable
  • UL and C/UL 508A Listed
OPTIONAL FEATURES:
  • Road case with casters and remote storage pocket
  • Half couplers for truss attachment
  • Modification to run single phase hoists up to 50amps total current
Item#:
CS-400RS
Available:
Special Order/Direct Ship
Call to order

Skjonberg CS-800

8 Channel Hoist Controller (remote and case not included)

STANDARD FEATURES:

  • Runs up to 8 hoists
  • 50 amp Hubbell power input connector
  • Hubbell power and control output connectors
  • 50 amp main emergency disconnect contactors
  • Safety keyswitch for on/off and phase selection
  • Input phase reversal
  • Phase power indicators
  • Choice of chassis:19"€ rack mountable or radial curved sides for standalone use
  • Branch circuit breaker protection, 2 hoists per breaker
  • Protective bar over circuit breakers
  • UL and C/UL 508A Listed

OPTIONAL FEATURES:

  • Road case with casters and remote storage pocket
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Half couplers for truss attachment
  • Modification to run single phase hoists up to 50amps total current
  • Phase selector switch in place of keyswitch

SPECIFICATIONS:

  • Rack mountable chassis dimensions:
    19.0 in.W x 24.5 in. H x 6.0 in. D
  • Standalone chassis dimensions:
    16.5 in. W x 24.5 in. H x 7.0 in. D
  • Weight: 50 lbs.
  • Electrical: 208-240 vac, 50amps, 50-60hz, 3 phase

CUSTOM VARIATIONS:

  • Single Phase Hoist Control
  • HCS-800 for 2hp hoists
  • Cam-lok Input
  • Custom Cases
  • Direct Control with Reversing Contactors
  • Control Only, with Remote or Local Run
  • Multi-unit Packaging
Item#:
CS-800
Available:
Special Order/Direct Ship
Call to order

Skjonberg CS-800LX

8 Channel Hoist Control/ 7 Pin Outputs (remote unit and case not included )

STANDARD FEATURES:

  • Runs up to 8 hoists
  • 50amp Hubbell power input connector
  • Litton, Veam or Socapex output connectors
  • Input phase reversal
  • Phase power indicators
  • 50amp main emergency disconnect contactors
  • Choice of chassis: 19" rack mountable or radial curved sides for standalone use
  • Branch circuit breaker, 2 hoists per breaker
  • Safety keyswitch for on/off and phase reversal input phase reversal
  • Protective bar over circuit breakers
  • Multi-pin connector to accept our standard remote cable

OPTIONAL FEATURES:

  • Road case with casters and remote storage pocket (shown)
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Modification to run single phase hoists up to 50 amps total current
  • Phase selector switch in place of keyswitch

SPECIFICATIONS:

  • Rack mountable chassis dimensions:19.0 in.W x 15.75 in. H x 6.0 in. D
  • Standalone chassis dimensions: 16.5 in. W x 15.75 in. H x 7.0 in. D
  • Weight: 35 lbs.
  • Electrical: 208-240 vac, 50 amps, 50-60 hz, 3 phase

CS REMOTE FEATURES:

  • Square or slim shape
  • Detachable cable or hardwired cable models offered
  • Hardwired units have 25 ft cable with metal strain relief at each end for added strength
  • Up/down toggles with indicator leds for each hoist
  • Momentary run switch
  • Emergency stop/ power on/off toggle
Item#:
CS-800LX
Available:
Special Order/Direct Ship
Call to order
1 - 12 of 17 ▶|
View: