S2K Commerce - Products Dropdown


S2K Commerce - Shopping Cart


S2K Commerce - Order Entry


Skjonberg CS-400R

4 Channel Hoist Controller (remote unit not included)
Item #:CS-400R 
Available: Special Order/Direct Ship

The CS-400R is just right for the growing company. Four chain motors can be run individually or in unison. Both power distribution and relay control for the hoists reside in the same compact unit. The basic design runs 3 phase motors at 208V-220V. A 30 amp Hubbell Twistlock input provides adequate current to run four 1hp motors. Each circuit breaker protects 2 motors. The CS-400RS is available to run most single phase motors. Manual hoist selection and running is accomplished using our Remote Manual Run Handsets. A basic package would include our P4-CS-SQ-AK25, a 4 channel remote with 25 ft remote cable hardwired into the handset. 

Contact us to order


  • Runs up to 4 hoists
  • 30amp Hubbell power input connector
  • Hubbell power and control output connectors
  • 50amp main emergency disconnect contactors
  • Safety keyswitch for on/off and phase selection
  • Input phase reversal
  • Phase power indicators
  • Choice of chassis: 19" rack mountable or radial curved sides for standalone use
  • Branch circuit breaker protection, 2 hoists per breaker
  • Protective bar over circuit breakers
  • Multi-pin connector to accept our standard remote cable
  • UL and C/UL 508A Listed


  • Road case with casters and remote storage pocket
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Half couplers for truss attachment
  • Modification to run single phase hoists up to 50amps total current
  • Phase selector switch in place of keyswitch


  • Rack mountable chassis dimensions:
    19.0 in.W x 15.75 in. H x 6.0 in. D
  • Standalone chassis dimensions:
    16.5 in. W x 15.75 in. H x 7.0 in. D
  • Weight: 32 lbs.
  • Electrical: 208-240 vac, 30 amps, 50-60 hz, 3 phase
Skjonberg P4-CS-SQ-AK25 4 Channel Remote Control w/Attached Cable 25'
This 4 channel remote unit with attached 25' cable is compatible with the CS-400R thru the CS-800 series hoist controllers.
Item #:
Call to order
Skjonberg P4-CS-SQ-D 4 Channel Remote Control w/ Detached Cable
This 4 channel remote unit with a detachable cable is compatible with the CS-400R thru the CS-800 series hoist controllers. Cable is sold separately.
Item #:
Call to order
Skjonberg CBL-RC-TJ21K-25 25' Remote Cable for CS Series Remotes/ Controller to Remote
25' control cable for CS series remotes controllers with detached cable option. This is used from controller to remote.

Item #:
Call to order