S2K Commerce - Products Dropdown


S2K Commerce - Shopping Cart


S2K Commerce - Order Entry


Skjonberg CS-400RLX

4 Channel Hoist Controller (remote unit not included)
Item #:CS-400RLX 
Available: Special Order/Direct Ship

The CS-400RLX is the 4 channel version of our popular CS-800LX hoist relay control. Hoists running through 7 pin Socapex, 7 pin Litton Veam or 14 pin Cannon use the CS-400RLX. Four chain motors can be run individually or in unison. This model has the same versatility as other CS models. One common application is to plug a CS-400RLX and a CS-800LX into one of our 12 channel remote handsets for a 12 motor job when needed. The remotes and cabling options are illustrated in the Remote Manual Run Handsets section. Remote and case are sold separately.

Contact us to order


  • Runs up to 4 hoists
  • 30amp Hubbell power input connector
  • Litton, Veam or Socapex hoist power and control output connectors
  • 50amp main emergency disconnect contactors
  • Safety keyswitch for on/off and phase selection
  • Input phase reversal
  • Phase power indicators
  • Choice of chassis: 19" rack mountable or radial curved sides for standalone use
  • Branch circuit breaker protection, 2 hoists per breaker
  • Protective bar over circuit breakers
  • Multi-pin connector to accept our standard remote cable


  • Road case with casters and remote storage pocket (shown)
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Half couplers for truss attachment
  • Modification to run single phase hoists up to 50amps total current
  • Phase selector switch in place of keyswitch


  • Rack mountable chassis dimensions:
    19.0 in.W x 15.75 in. H x 6.0 in. D
  • Standalone chassis dimensions:
    16.5 in. W x 15.75 in. H x 7.0 in. D
  • Weight: 32 lbs.
  • Electrical: 208-240 vac, 30amps, 50-60 hz, 3 phase


  • Detachable cable or hardwired cable models offered
  • Hardwired units have 25 ft cable with metal strain relief at each end for added strength
  • Up/down toggles with indicator leds for each hoist
  • Momentary run switch
  • Emergency stop/ power on/off toggle
Skjonberg P4-CS-SQ-AK25 4 Channel Remote Control w/Attached Cable 25'
This 4 channel remote unit with attached 25' cable is compatible with the CS-400R thru the CS-800 series hoist controllers.
Item #:
Call to order
Skjonberg P4-CS-SQ-D 4 Channel Remote Control w/ Detached Cable
This 4 channel remote unit with a detachable cable is compatible with the CS-400R thru the CS-800 series hoist controllers. Cable is sold separately.
Item #:
Call to order
Skjonberg CBL-RC-TJ21K-25 25' Remote Cable for CS Series Remotes/ Controller to Remote
25' control cable for CS series remotes controllers with detached cable option. This is used from controller to remote.

Item #:
Call to order