S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  Intercom-Communications  >  Intercom  >  Clear-Com  >  Power Supplies  > Clear-Com PS-702

Clear-Com PS-702

2-Channel 1-Amp Rack Mount Power Supply
Item #:PS-702 
Available: Special Order/Direct Ship
The PS-702 can deliver 1.2 amps at 30 volts DC to two channels. This is sufficient to power up to 40 beltpacks, 10 speaker stations, or 12 headset stations even under the most demanding conditions. Either channel is capable of supplying up to 1.2 amps. The full current capacity may be divided between the two channels.
You must be logged in to order this item.
Log in here

Technical Specifications


Program Line Input

Maximum Level before Clipping: >= 20dBu
Input Impedance: >= 5K ohm

Frequency Response
Program Input - Partyline: 200 - 20KHz ± 3dB

Max Distortion
Program Input - Partyline: <= 0.2%

Noise
Program Mic Input - Partyline:< -70dBu

Max Gain
Program Input - Partyline: >= -16dB

Min Gain
Program Input - Partyline: <= -20dB

Mains Power
Input Voltage Range: 100 - 240 VAC
Input Frequency Range: 50 - 60 Hz
Input Power: <= 60 VAC
Output Voltage: 30 VDC ± 0.5V
Output Current per Channel (Continuous): 1.2 A
Output Current per Channel (Peak): 2 A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
Short Circuit Recovery Time (1st short): <= 0.5 sec
Short Circuit Recovery Time: >= 20 shorts in 20sec <= 20 sec

Station Capacity
Up to 40 RS-601 beltpacks or 10 speaker stations or 12 headset stations distributed over both channels

Rear Panel Connectors
Intercom: (6) XLR-3M (3 per channel)
Program: (1) XLR-3F
AC Power: IEC 320 connector

Rear Panel Controls
(2) Termination On-Off switches
(1) Volume control

Front Panel Connectors
Intercom (1) XLR-3M

Front Panel Controls & Indicators
(1) Intercom channel switch
(1) A+B link switch
(2) Program switch
(2) Send level controls
(1) Test tone switch
(2) Overload LEDs
(1) Link indicator LED
(1) Power indicator LED
(1) Power switch

Environmental
32š - 122šF (0š - 50šC)

Dimensions
19 in. W x 1.75 in. H x 7.5 in. D
(483 mm x 44 mm x 190 mm)

Weight
6.16 lbs. (2.80 kg)