S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
1 - 5 of 5
View:
 
Description
Price
Quantity

Tech Alert II

LED Communications Beacon
Specifications:
  • White Light LED Strobe with Directional Output
  • Loud 85db Pulsing Buzzer with a Disable Audio Switch
  • Blue Power Indicator LED
  • Rugged Die-cast Aluminum Enclosure
  • Roll Bars protect LED Strobe and provide Hanging Point
  • Durable Black Powder Coat Finish
  • Neutrik 3 pin XLR Male and Female connectors
  • Rubber Feet and Velcro Strips Included
  • 3 Year Warranty on Parts and Labor
Dimensions: 4.25”W x 3.15”D x 3.75”H
Weight: 0.8 lbs. (Ship weight 1.1 lbs.)
IP20 Rated (indoor use only)

Operation:
**Flash Only - Simply Press and Release your Intercom Base Station or Beltpack call button. The Tech Alert II strobe will Flash 8 to 10 times.
 
**Flash and Buzzer - Simply Press and Hold (for at least 5 seconds) your Intercom Base Station or Beltpack call button. The Tech Alert II strobe will flash and activate its audio alarm when audio is enabled. Both the strobe and audio alarm will stay active until the call signaling button is released.

Item#:
2-000-000-0021
Available:
In Stock
299.99
Each

Clear-Com PK-7

1-Channel 0.4 Amp Portable Power Supply

Technical Specifications


Mains Input

Input Voltage: 100-240 VAC
Input Frequency Range: 50-60Hz

Power Output
Output Voltage: 22-30 VDC
Output Current: >=400mA
Output Connectors: (3) XLR-3F

Front Panel Connectors and Indicators
Input Connector: (1) 2.1mm

Co-axial connector
Indicators: (2) LEDs: red (overload), green (normal)

Environmental
32 - 122F (0 - 50C)

Dimensions
3.8 in. W x 2 in. H x 4.7 in. D
(97mm x 50.8mm x 119mm)

Weight
1.0 lbs. (0.457 kg)
Transformer: 0.90 lbs. (0.41 kg)
Item#:
PK-7 QUE-COM
Available:
Special Order/Direct Ship
You must be logged in to order this item. Log in here

Clear-Com PS-702

2-Channel 1-Amp Rack Mount Power Supply

Technical Specifications


Program Line Input

Maximum Level before Clipping: >= 20dBu
Input Impedance: >= 5K ohm

Frequency Response
Program Input - Partyline: 200 - 20KHz ± 3dB

Max Distortion
Program Input - Partyline: <= 0.2%

Noise
Program Mic Input - Partyline:< -70dBu

Max Gain
Program Input - Partyline: >= -16dB

Min Gain
Program Input - Partyline: <= -20dB

Mains Power
Input Voltage Range: 100 - 240 VAC
Input Frequency Range: 50 - 60 Hz
Input Power: <= 60 VAC
Output Voltage: 30 VDC ± 0.5V
Output Current per Channel (Continuous): 1.2 A
Output Current per Channel (Peak): 2 A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
Short Circuit Recovery Time (1st short): <= 0.5 sec
Short Circuit Recovery Time: >= 20 shorts in 20sec <= 20 sec

Station Capacity
Up to 40 RS-601 beltpacks or 10 speaker stations or 12 headset stations distributed over both channels

Rear Panel Connectors
Intercom: (6) XLR-3M (3 per channel)
Program: (1) XLR-3F
AC Power: IEC 320 connector

Rear Panel Controls
(2) Termination On-Off switches
(1) Volume control

Front Panel Connectors
Intercom (1) XLR-3M

Front Panel Controls & Indicators
(1) Intercom channel switch
(1) A+B link switch
(2) Program switch
(2) Send level controls
(1) Test tone switch
(2) Overload LEDs
(1) Link indicator LED
(1) Power indicator LED
(1) Power switch

Environmental
32š - 122šF (0š - 50šC)

Dimensions
19 in. W x 1.75 in. H x 7.5 in. D
(483 mm x 44 mm x 190 mm)

Weight
6.16 lbs. (2.80 kg)
Item#:
PS-702
Available:
Special Order/Direct Ship
You must be logged in to order this item. Log in here

Clear-Com PS-704

4-Channel 2-Amp Rack Mount Power Supply

Technical Specifications


Program Line Input

Maximum Level before Clipping: >= 20dBu
Input Impedance: >= 5K ohm

Frequency Response
Program Input - Party-line: 200 - 20KHz ± 3dB

Max Distortion
Program Input - Party-line : <= 0.2%

Noise
Program Mic Input - Party-line:< -70dBu

Max Gain
Program Input - Party-line: >= -16dB

Min Gain
Program Input - Party-line: <= -20dB

Mains Power
Input Voltage Range: 100 - 240 VAC
Input Frequency Range: 50 - 60 Hz
Input Power : <= 60 VAC
Output Voltage: 30 VDC ± 0.5V
Output Current per Channel (Continuous): 1.2 A
Output Current per Channel (Peak): 2 A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
Short Circuit Recovery Time (1st short): <= 0.5 sec
Short Circuit Recovery Time: >= 20 shorts in 20sec) <= 20 sec

Station Capacity
Up to 40 RS-601 beltpacks or 10 speaker stations or 12 headset stations distributed over both channels

Rear Panel Connectors
Intercom: (8) XLR-3M (2 per channel)
Program: (1) XLR-3F
AC Power: IEC 320 connector

Rear Panel Controls
(4) Termination On-Off switches
(1) Volume control

Front Panel Controls & Indicators
(4) Program switch
(4) Send level controls
(4) Overload LEDs
(1) Power indicator LED
(1) Power switch

Environmental
32š - 122šF (0 - 50šC)

Dimensions
19 in. W x 1.75 in. H x 7.5 in. D
(483 mm x 44 mm x 190 mm)

Weight
6.16 lbs. (2.80 kg)
Item#:
PS-704
Available:
Special Order/Direct Ship
You must be logged in to order this item. Log in here

Audio-Intercom XLR Cable Configurator

Build Your Mic-Intercom Cables Here

Item#:
XLR CABLE CONF
0.0000
Each
1 - 5 of 5
View: