S2K Commerce - Products Dropdown
Actions
- ${title}
Loading...
S2K Commerce - Shopping Cart
Actions
- ${title}
Loading...
My Cart
Items
0
S2K Commerce - Order Entry
Actions
- ${title}
Loading...
1 - 8 of 8
Description
Price
Quantity
Doug Fleener Design 123-5
One Input -Three Output Opto Splitter / 5 Pin XLR
Basic Specification
model: 123, 125, 1211
| Input circuit: | EIA-485 receiver with 120 ohm termination resistor between +Data and -Data (Units with feed through connectors do not have internal termination) |
||||||||
| Input signal: | 0.2 volts minimum, 12 volts maximum | ||||||||
| Output circuit: | EIA-485 driver | ||||||||
| Connectors: | Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 connectors optional) |
||||||||
| Feed through: | A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models. | ||||||||
| Isolation: |
2500 volt optical coupler, 1500 volt split bobbin transformer |
||||||||
| Power input: |
100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) |
||||||||
| Color: |
Top, bottom and sides: Silver hammer tone |
||||||||
| Size: |
| ||||||||
741.00
Each
Doug Fleener Design 123-5-FT
One Input -Three Output Opto Splitter / 5 Pin XLR w/ Feed Thru
Basic Specification
model: 123, 125, 1211
| Input circuit: | EIA-485 receiver with 120 ohm termination resistor between +Data and -Data (Units with feed through connectors do not have internal termination) | ||||||||
| Input signal: | 0.2 volts minimum, 12 volts maximum | ||||||||
| Output circuit: | EIA-485 driver | ||||||||
| Connectors: | Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 connectors optional) | ||||||||
| Feed through: | A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models. | ||||||||
| Isolation: | 2500 volt optical coupler, 1500 volt split bobbin transformer | ||||||||
| Power input: | 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) | ||||||||
| Color: | Top, bottom and sides: Silver hammer tone | ||||||||
| Size: |
| ||||||||
741.00
Each
Doug Fleener Design 125-3
One Input - Five Output Opto Splitter / 3 Pin XLR
Basic Specification
model: 123, 125, 1211
| Input circuit: | EIA-485 receiver with 120 ohm termination resistor between +Data and -Data (Units with feed through connectors do not have internal termination) | ||||||||
| Input signal: | 0.2 volts minimum, 12 volts maximum | ||||||||
| Output circuit: | EIA-485 driver | ||||||||
| Connectors: | Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 connectors optional) | ||||||||
| Feed through: | A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models. | ||||||||
| Isolation: | 2500 volt optical coupler, 1500 volt split bobbin transformer | ||||||||
| Power input: | 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) | ||||||||
| Color: | Top, bottom and sides: Silver hammer tone | ||||||||
| Size: |
| ||||||||
1058.00
Each
Doug Fleener Design 125-5
One Input - Five Output Opto Splitter / 5 Pin XLR
Basic Specification
model: 123, 125, 1211
| Input circuit: | EIA-485 receiver with 120 ohm termination resistor between +Data and -Data (Units with feed through connectors do not have internal termination) | ||||||||
| Input signal: | 0.2 volts minimum, 12 volts maximum | ||||||||
| Output circuit: | EIA-485 driver | ||||||||
| Connectors: | Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 connectors optional) | ||||||||
| Feed through: | A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models. | ||||||||
| Isolation: | 2500 volt optical coupler, 1500 volt split bobbin transformer | ||||||||
| Power input: | 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) | ||||||||
| Color: | Top, bottom and sides: Silver hammer tone | ||||||||
| Size: |
| ||||||||
1058.00
Each
Doug Fleener Design 125-5-FT
One Input - Five Output Opto Splitter / 5 Pin XLR w/ Feed Thru
Basic Specification
model: 123, 125, 1211
| Input circuit: | EIA-485 receiver with 120 ohm termination resistor between +Data and -Data (Units with feed through connectors do not have internal termination) | ||||||||
| Input signal: | 0.2 volts minimum, 12 volts maximum | ||||||||
| Output circuit: | EIA-485 driver | ||||||||
| Connectors: | Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 connectors optional) | ||||||||
| Feed through: | A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models. | ||||||||
| Isolation: | 2500 volt optical coupler, 1500 volt split bobbin transformer | ||||||||
| Power input: | 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) | ||||||||
| Color: | Top, bottom and sides: Silver hammer tone | ||||||||
| Size: |
| ||||||||
1130.00
Each
Doug Fleenor Design 127-5
7 Output DMX/RDM Isolated Splitter
The 127 differs from an standard opto-splitter in that any of the eight ports can receive data, with the seven remaining ports re-transmitting that data. Each of the eight ports offers fully bidirectional optical isolation and transient protection to 15,000 volts.
The 127 is protocol independent, supporting ESTA's RDM protocol and other protocols including those from High End Systems and Martin Professional. Other features include a universal power supply, full bidirectional optical isolation, gold plated connectors (Neutrik), and a rugged tabletop, truss, or rack mountable enclosure.
NOTE: This product uses a slew-rate-limited output drivers. Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables.
Available connector types: 5 pin XLR, 3 pin XLR, terminal block, RJ-45 (ESTA or Color Kinetics pinout), or mounted in a JBOX enclosure.
SPECIFICATIONS: All specifications meet or exceed DMX512 requirements.
Input circuit: EIA-485 transceiver with 120 ohm fail safe termination between +Data and -Data
Input protection: Undamaged by up to ±60 Volts continuous, ±15KV transients.
Input signal: DMX512, DMX512/1990, DMX512-A, or RDM. 0.2 volts minimum, 12 volts maximum
Signal connectors: Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 optional)
Termination: Input and all outputs are terminated per RDM specifications.
Power input: 100 to 240 VAC 50/60 Hz, ½ Amp
Indicators: Red LED for POWER. Green LED for presence of DMX512 or RDM.
Isolation: All eight ports are electrically isolated from each other to 1000 Volts.
Color: Front, Back: Black
Top, Bottom, Sides: Silver Hammertone
Size and weight: 1.7"H × 6.5”D × 16.5"W, 4.5 pounds
Environmental: 0-40° C (32-104° F), 10-90% humidity, non-condensing
Mounting: Capable of being installed in a standard rack with a rack kit (model RK16-1)
The 127 is protocol independent, supporting ESTA's RDM protocol and other protocols including those from High End Systems and Martin Professional. Other features include a universal power supply, full bidirectional optical isolation, gold plated connectors (Neutrik), and a rugged tabletop, truss, or rack mountable enclosure.
NOTE: This product uses a slew-rate-limited output drivers. Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables.
Available connector types: 5 pin XLR, 3 pin XLR, terminal block, RJ-45 (ESTA or Color Kinetics pinout), or mounted in a JBOX enclosure.
SPECIFICATIONS: All specifications meet or exceed DMX512 requirements.
Input circuit: EIA-485 transceiver with 120 ohm fail safe termination between +Data and -Data
Input protection: Undamaged by up to ±60 Volts continuous, ±15KV transients.
Input signal: DMX512, DMX512/1990, DMX512-A, or RDM. 0.2 volts minimum, 12 volts maximum
Signal connectors: Gold plated 5 pin Neutrik D-1 Series (3 pin connectors, terminal blocks, or RJ45 optional)
Termination: Input and all outputs are terminated per RDM specifications.
Power input: 100 to 240 VAC 50/60 Hz, ½ Amp
Indicators: Red LED for POWER. Green LED for presence of DMX512 or RDM.
Isolation: All eight ports are electrically isolated from each other to 1000 Volts.
Color: Front, Back: Black
Top, Bottom, Sides: Silver Hammertone
Size and weight: 1.7"H × 6.5”D × 16.5"W, 4.5 pounds
Environmental: 0-40° C (32-104° F), 10-90% humidity, non-condensing
Mounting: Capable of being installed in a standard rack with a rack kit (model RK16-1)
Call to order
1 - 8 of 8