S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...

Phase 3 Powersafe ULLS001

455A Single Pole Source Connector Green, 4/0 Ready
Item #:ULLS001 
Available: Special Order/Direct Ship
Phase 3 Powersafe range are the highest rated, safest and finest quality single pole connectors as used by the power, events, military and manufacturers worldwide. Powersafe single pole connectors are 100% manufactured and assembled in the UK by Phase 3 and are UL Listed for high current connections up to 455A. The device's powerlock compatible mating system is mechanically keyed and locked, meaning Powersafe cannot be mis-mated or accidentally disconnected under load.
79.99
Each
Quantity:
Quantity Price
1.0 79.99
Additional info:
  • M40A cable gland - fits cable from .63" to .86" (16-22 mm)
  • Wire reducing kits and bushings are available for 3/0, 2/0,1/0, #2, and #4 wire.
  • Rated for 455 amps / 600VAC
  • UL listed for USA and Canada
  • Reduced Insertion Force
  • Improved Impact Resistance
  • Rubber Hand Grip for ease of coupling & added impact protection
  • Water & Dust Proof Ingress Protection Rating (IP67)
  • High-temperature resistant materials
  • Flame Retardant (UL94-VO)
  • Increased Short Circuit Ratings (35.5Ka)
  • Protection against electric shock (IP2X)
  • Finger-Proof Contacts
  • Compatible with VEAM PowerLock connectors.
  • A release key is required to disconnect the mated connectors.
Phase 3 Powersafe SCP0095
Phase 3 Powersafe SCP0095 Secondary Release Key for Powersafe Mated Connectors
This is the secondary release key needed to disconnect Powersafe source and drain connectors when mated. 
Item #:
SCP0095
2.61
Each
Phase 3 Powersafe PP00006
Phase 3 Powersafe PP00006 Reduction Sleeve R95 for 3/0 Wire
The reduction sleeve allows for 3/0 wire to be used with the Powersafe drain and source line connectors.
Item #:
PP00006
0.97
Each
Phase 3 Powersafe PP00015
Phase 3 Powersafe PP00015 Reduction Sleeve Kit R25 for #4 Wire
The reduction sleeve kit allows for #4 wire to be used with the Powersafe drain and source line connectors.
Item #:
PP00015
4.35
Each
Phase 3 Powersafe PP00016
Phase 3 Powersafe PP00016 Reduction Sleeve Kit R35 for #2 Wire
The reduction sleeve kit allows for #2 wire to be used with the Powersafe drain and source line connectors.
Item #:
PP00016
3.82
Each
Phase 3 Powersafe PP00017
Phase 3 Powersafe PP00017 Reduction Sleeve Kit R50 for 1/0 Wire
The reduction sleeve kit allows for 1/0 wire to be used with the Powersafe drain and source line connectors.
Item #:
PP00017
2.92
Each
Phase 3 Powersafe PP00018
Phase 3 Powersafe PP00018 Reduction Sleeve Kit R70 for 2/0 Wire
The reduction sleeve kit allows for 2/0 wire to be used with the Powersafe drain and source line connectors.
Item #:
PP00018
2.25
Each
Phase 3 Powersafe PP00575
Phase 3 Powersafe PP00575 M40SS 10-16mm Gland Bushing for Powersafe Inline Connectors
19mm gland bushing use to reduce the M40A cable gland on Powersafe drain and source line connectors to fit 1/0, 2/0, and 3/0 Type SC cable.
Item #:
PP00575
1.21
Each
Phase 3 Powersafe PP00131
Phase 3 Powersafe PP00131 M40S 19mm Gland Bushing for Powersafe Inline Connectors
19mm gland bushing use to reduce the M40A cable gland on Powersafe drain and source line connectors to fit #4 AWG, #2 AWG, and #1 AWG Type SC cable.
Item #:
PP00131
1.21
Each