S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...

Doug Fleener Design Node4

Ethernet to DMX Interface / Artnet - sACN
Item #:NODE4 
Available: Special Order/Direct Ship
The NODE family of Ethernet to DMX interfaces work with ArtNet, streaming ACN (aka sACN, ANSI E1.31, Net3), draft sACN (used by some ETC products), ShowNet (by Strand Lighting), and KiNet (by Color Kinetics) and can be configured using a built in web browser. They have zero boot time upon application of power.
Contact us to order
Ship Weight 9 lbs.
PORT SPECIFICATIONS
  • Port circuit: EIA-485 transceiver with 120 ohm fail safe termination between +Data and -Data
  • NOTE: This product uses a slew-rate-limited output drivers. Slew- rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables.
  • Input signal: 0.2 volts minimum, 12 volts maximum
  • Output signal: 1.5 volts (minimum) into 120 Ohm Termination
  • Connectors: Gold plated 5 pin XLR (typically four female connectors, male on request), Terminal Blocks Optional
  • Port protection: +60V continuous, +15KV transient
  • Isolation: 600 volts
ETHERNET SPECIFICATIONS
  • Ethernet Circuit: 100BASE-TX Fast Ethernet, Auto detects if crossover or regular cable is used, and speed negotiation up to 100Mbits.
  • Connector: Neutrik Ethercon
  • Isolation: 1500 Volts
  • Network Protocols: Artnet, Streaming ACN, Draft Streaming ACN
  • MAIN SPECIFICATIONS
  • Power input: 6W, 100 to 240 VAC 50/60 Hz
  • Color: Front, Back: Black
  • Top, Bottom, Sides: Silver Hammertone
  • Size and weight: 10.375" deep, 1.7" high, 16.5" wide 6 pounds
Doug Fleenor RK16-1
Doug Fleenor RK16-1 Rack Mount Kit for 16.5" Stepladder Series Chassis
This Rack Mount Kit adapts products that use the 16.5" Stepladder Series Chassis to a standard 19" rack. These products include the model 121Q, 1211 and Rerun-R1 through Rerun-R4.
Item #:
RK16-1
Call to order