S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...

The Light Source CPC

Chain Pole Clamp for Tents
Item #:CPC 
Available: Special Order/Direct Ship
The extremely low profile Chain Pole Clamp clamps securely to 2.375” to 7”OD tent poles utilizing many contact points to maximize its grip while the 6061T-6 aluminum link design minimizes potential damage to the tent poles. Beefy 1″ × 2″ link pairs conform to any shape. Design Loads is 1000 pounds with a design factor of at least 12! The actual usable load is dependent on the tent manufacturer’s permissible loads for the tent pole. Coarse adjust the clamping diameter with the 1” link increments and use the two offset locking pin holes in the main clamp body for finer adjustment. Tighten the Chain Pole Clamp with the included tee handle to secure the Chain Pole Clamp to the tent pole. Two ½-13 threaded holes are provided on the main clamp body for attaching point load accessories. 
386.62
Each
Quantity:
Quantity Price
1.0 386.62
The Light Source CPC-EK Chain Extension for Chain Pole Clamp
The Chain Pole Clamp Extension extends the grip range of the Chain Pole Clamp by 7” diameter out to 14” diameter. The Chain Pole Clamp Extension installs easily with just one quick release ball detent pin. The stainless steel chain link pins are hollow to allow easy length adjustment and attachments at any possible location around the perimeter of the clamp. Chain attachment accessories quickly connect with two stainless steel 3/8” x 1.5” ball detent pins to secure lights or accessory load points along the chain. All hardware is stainless steel to hold up in the outdoor unconditioned space tent environment.
Item #:
CPC-EK
250.17
Each
The Light Source CPC-CPA Coupler Mount for Chain Pole Clamp
The Coupler Pipe Mount is CNC machined from 6061T-6 aluminum and fastens to the main body of the Chain Pole Clamp with two ½”-13 flathead socket screws. A Mega-Coupler 1/2CS is then fastened to the Coupler Pipe Mount with an additional ½”-13 flathead socket screw. The Mega-Coupler provides a secure connection for a cross pipe or vertical pipe for hanging lighting or other loads. By using two vertically spaced Chain Pole Clamps each with the Coupler Mount, a 12 foot long pipe could be very securely positioned for lighting or other purposes.
Item #:
CPC-CPA
29.56
Each
The Light Source CPC-AB-MCMB Coupler Chain Mount for Chain Pole Clamp
The Coupler Chain Mount is CNC machined from 6061T-6 aluminum and attaches with two stainless steel 3/8” x 1.5” ball detent pins through the Coupler Chain Mount and the hollow chain link pins to secure an attached Mega-Coupler anywhere along the length of the chain. The Mega-Coupler then provides a secure connection for a cross pipe or vertical pipe for hanging lighting or other loads. By using two vertically spaced Chain Pole Clamps each with the Coupler Chain Mounts, multiple 12 foot long pipes could be very securely positioned for lighting or other purposes.
Item #:
CPC-AB-MCMB
59.69
Each
The Light Source CPC-AB-CMB Chandelier Mount for Chain Pole Clamp
The Chandelier Mount is CNC machined from 6061T-6 aluminum and fastens to the main body of the Chain Pole Clamp with two ½”-13 flathead socket screws. The substantial body of the Chandelier Mount has a square cross section hole for securing ½” square bar or tube chandelier mounts.
Item #:
CPC-AB-CMB
59.69
Each
The Light Source CPC-AB-2 Light Mount Bracket for Chain Pole Clamp
The Light Chain Mount Bracket is CNC machined and formed from 6061T-6 aluminum and attaches with two stainless steel 3/8” x 1.5” ball detent pins through the Light Chain Mount and the hollow chain link pins to secure securing ½” square bar or tube chandelier mounts anywhere along the length of the chain. Multiple lights can be mounted easily to the Chain Pole Clamp while maintaining a very low profile. The Light Chain Mount is fastened directly to the light fixture’s yoke with either ½”-13 or 3/8”-16 hardware the same as if it were a clamp.
Item #:
CPC-AB-2
39.79
Each
The Light Source CPC-MBCM Chandelier Mount for Chain Pole Clamp
The Chandelier Mount is CNC machined from 6061T-6 aluminum and fastens to the main body of the Chain Pole Clamp with two ½”-13 flathead socket screws. The substantial body of the Chandelier Mount has a square cross section hole for securing ½” square bar or tube chandelier mounts.
Item #:
CPC-MBCM
39.79
Each