S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...

ETC Nomad Puck 256

256 DMX Channel Lighting Controller
Item #:4380A1020 
Available: In Stock

This ETC-provided and supported mini-computer is locked down, so no software other than ETC applications can be installed, giving you peace of mind that your device is safe, secure and used only for your shows. ETCnomad Puck 256 also makes a very cost-effective, highly portable Remote Video Interface. It's like having two consoles in one . With ETCnomad Puck, you don't have to choose between the Cobalt® and Eos®/Element families, because it runs both platforms. A small but powerful control device, Puck has two HDMI video ports (DVI adapters can be used if needed), one network port and three USB ports. This is a Windows 7 unit; as such, multi-touch displays are supported.  **Note-This part number is only for the Nomad Puck and power supply, monitors and other accessories sold separately.

You must be logged in to order this item.
Log in here
Compatibility

Eos family:

  • Supported protocols include Net3/ACN/sACN and ArtNet
    • Note that Net2 protocol is not supported.
  • Net3 DMX/RDM Gateways
  • Show Control Gateway
  • I/O Gateway
  • ETC Gadget USB-to-DMX/RDM converter (up to 4 may be connected and RDM is supported)
  • iRFR, iRFR Preview and aRFR
  • Radio Focus Remote
  • Universal Fader Wing

When you use ETCnomad Puck as a primary or backup, the system output is determined by the device with the lowest output configuration. When it's connected as a client, ETCnomad Puck's output capacity of is ignored.

Cobalt family:

  • Supported protocols include Net3/ACN/sACN and ArtNet
    • Note that Net2 protocol is not supported.
  • Net3 DMX/RDM Gateways
  • Show Control Gateway
  • I/O Gateway
  • ETC Gadget USB-to-DMX converter (only one may be connected)
  • iRFR, iRFR Preview and aRFR
  • Radio Focus Remote
  • Universal Fader Wing
  • Third-party USB-MIDI panels via Direct MIDI

When you use ETCnomad Puck as a server or backup, the system output is determined by the output count of the server device. Only the number of outputs purchased will be backed up in case of a failover. When it's connected as a client, ETCnomad Puck's output capacity is ignored.