S2K Commerce - Products Dropdown


S2K Commerce - Shopping Cart


S2K Commerce - Order Entry

Home  >  Dimming / Power Controls  >  ETC  > ETC ES750-0A

ETC ES750-0A

Electronic Silent Dimmer; 750 watt w/ Edison
Item #:7145A1101-0A 
Available: Special Order/Direct Ship
Using ETC’s Electronic Silent* (ES) technology and a convection cooled design, this high-performance dimmer can be used with any 750W or less tungsten fixture. By taking DMX control signals directly, this self-dimming tungsten fixture can now reside alongside LEDs and moving lights, allowing system designs to focus on switched power and data distribution instead of centralized dimming systems.
Quantity Price
1.0 750.00
  • ES Dimming technology
- Produces no lamp noise (exceeds all rise time specs)
- Electronics sound-pressure level less than 0 dBA at 1 meter
*Sound level pressure falls below minimum audible field 0-20 khz @ < 1 meter from unit
- Convection-cooled
  • ANSI E1.20 RDM and ANSI E1.11 DMX512A
  • Yoke-mount; Universal-mounting bracket included, direct mounting on a fixture yoke in multiple orientations to accommodate maximum flexibility
  • Local operation
- One-press dim to FULL for easy focusing (press again to release to DMX input)
- Up and down level control
- Returns to previous level after power loss
  • No electrical assembly required: Ships as complete kit with burner assembly - just mount to the yoke and place lamp burner at the back of an existing fixture Bare-end or connectorized power cable input (Edison, Stage, or Twistlock)
  • Designed for use with all tungsten fixtures up to 750 watts
  • Electronic Silent technology for operation free of dimmer- and lamp-filament noise
  • Changes your fixture into a truly distributed fixture with onboard dimming and control
  • Electronic Dimming with harmonic and noise suppression - Acoustic specification replaces dimmer rise time
  • Manufactured of epoxy-painted aluminum body and anodised aluminum heat sink
  • Multiple yoke-fixing hole combinations for flexible mounting to the fixture
  • Convection-cooled; operates without cooling fans
  • Available in three colors: Black, White, or Silver
  • Input power feed:
- Suggested breaker sizing: 20A
- Voltage ranges: 85-140V, 180-260V
- Frequency range: 47-63Hz
  • 115V output regulation options for 208V operation:
  • Bare-end or connectorized power cable input (Edison, Stage Pin, or Twist)
  • 2500V isolation between control and power components
  • Max output 750W
  • DMX* In and Thru
  • DMX thru is not self-terminating
  • Electronic overcurrent protection
*Represents 1/4 unit device load for purpose of calculating DMX daisy -chain device count (max 32 unit devices per DMX chain)
  • Maximum ambient temperature 104°F
  • Humidity between 10 - 95%, non-condensing
  • Convection-cooled
  • Optimum cooling when mounted with heatsink fins in vertical position
  • 171 Btu at full load
  • DMX512A/RDM In and Thru via 5-Pin XLR connectors
  • Supports up to 32 units on one DMX line
  • RDM features:
- Discover (flashes light output)
- Find and set DMX address
- Change curve
- Receive overcurrent/undercurrent warnings
- Receive over temperature warning
  • Three-button local control: focus/test, up and down
- Single button dim to full for focus
- Up/down buttons for setting DMX address or for local intensity control
  • One status indicator: Multicolor LED for power, error and valid DMX
  • Three selectable dimmer output curves:
- IES modified square law
- Linear
- Switched (50% threshold)