S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
1 - 8 of 8
View:
 
Description
Price
Quantity

Doug Fleener Design 123-5

One Input-Three Output Opto Splitter/ 5 Pin XLR

Basic Specification
model: 123, 125, 1211



Input circuit: EIA-485 receiver with 120 ohm termination resistor between +Data and -Data
(Units with feed through connectors do not have internal termination)
Input signal: 0.2 volts minimum, 12 volts maximum
Output circuit: EIA-485 driver
Connectors: Gold plated 5 pin Neutrik D-1 Series
(3 pin connectors, terminal blocks, or RJ45 connectors optional)
Feed through: A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models.
Isolation:

2500 volt optical coupler, 1500 volt split bobbin transformer

Power input:

100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)

Color:

Top, bottom and sides: Silver hammer tone
Front and back: Black

Size:
123 6.5" deep, 1.7" high, 6.5" wide
125 6.5" deep, 1.7" high, 8.25" wide
1211 6.5" deep, 1.7" high, 16" wide
(19" Rack Kits Available)
Item#:
123-5
Available:
Special Order/Direct Ship
598.13
Each

Doug Fleener Design 123-5-FT

One Input-Three Output Opto Splitter/ 5 Pin XLR w/ Feed Thru

Basic Specification
model: 123, 125, 1211



Input circuit:EIA-485 receiver with 120 ohm termination resistor between +Data and -Data
(Units with feed through connectors do not have internal termination)
Input signal: 0.2 volts minimum, 12 volts maximum
Output circuit:EIA-485 driver
Connectors:Gold plated 5 pin Neutrik D-1 Series
(3 pin connectors, terminal blocks, or RJ45 connectors optional)
Feed through:A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models.
Isolation:

2500 volt optical coupler, 1500 volt split bobbin transformer

Power input:

100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)

Color:

Top, bottom and sides: Silver hammer tone
Front and back: Black

Size:
1236.5" deep, 1.7" high, 6.5" wide
1256.5" deep, 1.7" high, 8.25" wide
12116.5" deep, 1.7" high, 16" wide
(19" Rack Kits Available)
Item#:
123-5-FT
Available:
Special Order/Direct Ship
656.25
Each

Doug Fleener Design 124-3

One Input-Four Output Opto Splitter/ 3 Pin XLR
Item#:
124-3
Available:
Special Order/Direct Ship
405.94
Each

Doug Fleener Design 124-5

One Input-Four Output Opto Splitter/ 5 Pin XLR
 
Item#:
124-5
Available:
Special Order/Direct Ship
405.94
Each

Doug Fleener Design 125-3

One Input-Five Output Opto Splitter/ 3 Pin XLR

Basic Specification
model: 123, 125, 1211



Input circuit:EIA-485 receiver with 120 ohm termination resistor between +Data and -Data
(Units with feed through connectors do not have internal termination)
Input signal:0.2 volts minimum, 12 volts maximum
Output circuit:EIA-485 driver
Connectors:Gold plated 5 pin Neutrik D-1 Series
(3 pin connectors, terminal blocks, or RJ45 connectors optional)
Feed through:A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models.
Isolation:

2500 volt optical coupler, 1500 volt split bobbin transformer

Power input:

100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)

Color:

Top, bottom and sides: Silver hammer tone 
Front and back: Black

Size:
1236.5" deep, 1.7" high, 6.5" wide
1256.5" deep, 1.7" high, 8.25" wide
12116.5" deep, 1.7" high, 16" wide
(19" Rack Kits Available)
Item#:
125-3
Available:
Special Order/Direct Ship
854.06
Each

Doug Fleener Design 125-5

One Input-Five Output Opto Splitter/ 5 Pin XLR

Basic Specification
model: 123, 125, 1211



Input circuit:EIA-485 receiver with 120 ohm termination resistor between +Data and -Data
(Units with feed through connectors do not have internal termination)
Input signal:0.2 volts minimum, 12 volts maximum
Output circuit:EIA-485 driver
Connectors:Gold plated 5 pin Neutrik D-1 Series
(3 pin connectors, terminal blocks, or RJ45 connectors optional)
Feed through:A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models.
Isolation:

2500 volt optical coupler, 1500 volt split bobbin transformer

Power input:

100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)

Color:

Top, bottom and sides: Silver hammer tone 
Front and back: Black

Size:
1236.5" deep, 1.7" high, 6.5" wide
1256.5" deep, 1.7" high, 8.25" wide
12116.5" deep, 1.7" high, 16" wide
(19" Rack Kits Available)
Item#:
125-5
Available:
Special Order/Direct Ship
854.06
Each

Doug Fleener Design 125-5-FT

One Input-Five Output Opto Splitter/ 5 Pin XLR w/ Feed Thru

Basic Specification
model: 123, 125, 1211



Input circuit:EIA-485 receiver with 120 ohm termination resistor between +Data and -Data
(Units with feed through connectors do not have internal termination)
Input signal: 0.2 volts minimum, 12 volts maximum
Output circuit:EIA-485 driver
Connectors:Gold plated 5 pin Neutrik D-1 Series
(3 pin connectors, terminal blocks, or RJ45 connectors optional)
Feed through:A non-isolated feed through connector is standard on the eleven output model and is optional on the one, three, and five output models.
Isolation:

2500 volt optical coupler, 1500 volt split bobbin transformer

Power input:

100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)

Color:

Top, bottom and sides: Silver hammer tone
Front and back: Black

Size:
1236.5" deep, 1.7" high, 6.5" wide
1256.5" deep, 1.7" high, 8.25" wide
12116.5" deep, 1.7" high, 16" wide
(19" Rack Kits Available)
Item#:
125-5-FT
Available:
Special Order/Direct Ship
912.19
Each

Doug Fleener Design BIDI8

DMX Bidirectional Hub Splitter-1 In/ 7 Out

Basic Specification
model: BIDI8

Port circuit: EIA-485 transceiver with 120 ohm fail safe termination between +Data and -Data

(Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables)

Input signal: 0.2 volts minimum, 12 volts maximum
Output signal: 1.5 volts (minimum) into 120 Ohm Termination
Connectors: Gold plated 5 pin XLR (typically one male, seven female),
Terminal Blocks Optional
Port protection: ±60V continuous, ±15KV transient
Isolation: 600 volts
Power input: 100 to 240 VAC 50/60 Hz, ½ Amp
Color: Front, Back: Black
Top, Bottom, Sides: Silver Hammertone
Size & weight: 6.5" deep, 1.7" high, 16.5" wide 4.5 pounds
(19" rack adapter available).
Item#:
BIDI8
Available:
Special Order/Direct Ship
1683.75
Each
1 - 8 of 8
View: